To improve the performance of transparent LED display screens, proper maintenance is necessary

So what are the main daily maintenance tasks for LED display screens? What are the precautions during maintenance and upkeep? Let’s take a look at some maintenance tips provided by professionals.
Tutorial on Daily Cleaning Steps for Transparent LED Display Screen
transparent led video walls (2)
Firstly, it is necessary to consider purchasing better quality cleaning kits. The general cost of cleaning solutions includes electrolytes, high-purity distilled water, anti-static solutions, etc. It can effectively clean dust and other dirt marks on the transparent screen of light-emitting diodes.
Secondly, some friends believe that clean water can also be used as it will not affect the transparent outdoor LED screen. However, the cleaning effect of clean water is relatively poor, and dust will adhere again after cleaning. It should also be noted that water cannot be sprayed on the screen. On the contrary, spray a little cleaning solution on the cleaning cloth and gently wipe in the same direction. Before cleaning, you need to unplug the power cord.
Transparent LED display screen
The cleaning and maintenance of outdoor transparent LED display screens can be divided into three steps:
Step 1: Vacuum cleaning. Remove and clean the dirt and dust on the surface of the sieve. Remove dirt and dust from the surface of the transparent screen cover of the light-emitting diode.
Step 2: Wet washing. Use water spray and steam humidification to spray the display cover, and use the soft brush on the vacuum cleaner to scrub the lampshade to remove dirt; Note that the cleaning solution should not be sprayed directly onto the screen, but a small amount of cleaning solution should be sprayed onto the cleaning cloth, and then gently wiped in the same direction. You can also use the soft brush on the vacuum cleaner to scrub the lampshade to remove dirt.
Step 3: Drying. Use a vacuum cleaner to remove water droplets and marks left after drying and wet washing, ensuring that the display mask is clean and dust-free.
Note: Two points to note when preparing for cleaning:
1. Before cleaning, it is necessary to unplug the power cord.
2. Choose cleaning solution, usually cleaning solution, including electrolyte, high-purity distilled water, anti-static liquid, etc. The selection should have good quality to effectively clean the dust and other dirt marks on the LED transparent screen.
Transparent LED display screen
Precautions for maintenance and upkeep of transparent LED display screens
1. Keep the power supply stable, with good grounding protection, and try not to use it in harsh natural environments (such as strong lightning weather).
2. Water ingress, iron powder, and other easily conductive metal objects are strictly prohibited inside the screen. Transparent LED display screens should be placed in a low dust environment as much as possible. Large amounts of dust can affect the display effect, and excessive dust can cause damage to the circuit.
3. Due to various reasons of water ingress, please immediately turn off the power and contact maintenance personnel until the display board inside the screen is dry before use.
4. Keep the humidity in the environment where the LED transparent screen is used, and do not let anything with damp properties enter. Applying electricity to components containing humidity can cause corrosion and permanent damage.
5. Regularly clean the accumulated dust on the screen to avoid affecting the heat dissipation function. Vacuum cleaners and air gun facilities are usually used for maintenance to remove dust from the air. Do not use a cloth that is too hard or rough to wipe it clean, as it may damage the surface of the product and the lamp beads.