LED point light source is a common light source form. In the process of landscape lighting, LED point light is often used as lighting decoration. However, in order to achieve good and stable lighting effect, it is necessary to give high installation requirements, and can not damage the external wall of the building in the process of installation. So what are the installation methods of LED point light source?
What kinds of installation methods can be adopted for LED point light source?
1. Aluminum trough rail type installation
When using this method to install the LED point light source, it is necessary to fix the bottom shell on the facade of the building wall, and then clip the LED point light source into the aluminum slot of the large hole in advance, and then directly and firmly buckle it on the bottom shell. The installation quality standard is reliable and the line with no leakage is preferred. The installation of aluminum trough track type has a wide range of use, and the aluminum groove used can choose the same color as the wall, so it is also very beautiful in the daytime.
2. Snap wire installation
Compared with the installation of aluminum channel track type, the installation method of buckle pulling steel wire has certain limitations, which is generally used in the installation of LED point light source in glass curtain wall and suspended place. During the installation, the clasp should be clamped into the steel wire first, and then the LED light source should be clamped into the clip.
3. Whole plate punching installation
When the whole board punching method is used to install the LED point light source, the holes are usually punched on the iron plate, aluminum plate or stainless steel plate according to the calculated position, and then the LED point light source is penetrated from the back of the plate and connected with the wire. Even if the installation is completed, the installation method of the whole board punching is also more commonly used at present.